Front Grille Cover Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Put on gloves to protect your hands.
Take care not to scratch the front bumper.

Remove the clips securing the front grille cover (A).
NOTE: To release the clips, pry up on the center pin at the notch (B).

Fig 1: Identifying Front Grille Cover And Notches
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Slide the front grille cover assembly (A) back to detach it from the lip (B) of the front grille (C), and remove the cover.

Fig 2: Sliding Front Grille Cover Assembly
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the front grille cover in the reverse order of removal and note these items.
- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.