LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Transmission Disassemble >> 5th/6th Speed Driven Gear Removal

5th/6th Speed Driven Gear Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing 5th/6th Speed Driven Gear
    GM2397555Courtesy of GENERAL MOTORS CORP.
  1. Using the J 8433:  puller (1), J 39431:  gear remover (3), and the J 39431-3:  adapter bolts (2), remove the 5th/6th speed driven gear.
    2. Fig 2: 5th/6th Synchronizer Components
    GM1887538Courtesy of GENERAL MOTORS CORP.
  2. Remove the following 5th/6th synchronizer components:
    1. The speed drive gear inner cone (1)
    2. The speed drive gear friction cone (2)
    3. The speed drive gear synchronizer blocking ring (3)
    4. The 5th/6th shift fork (4) with the synchronizer sleeve (6)
    5. The synchronizer inserts (5)
    3. Fig 3: Synchronizer Hub Assembly
    GM2397557Courtesy of GENERAL MOTORS CORP.
  3. Remove the synchronizer hub assembly (1).
    4. Fig 4: 6th Speed Drive Gear Components
    GM1887543Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components:
    1. The 6th speed drive gear synchronizer blocking ring
    2. The 6th speed drive gear friction cone
    3. The 6th speed drive gear inner cone
    5. Fig 5: View Of 6th Driven Gear, Caged Needle Bearing, And Spacers
    GM1887546Courtesy of GENERAL MOTORS CORP.
  5. Remove the 6th driven gear, caged needle bearing, and 2 spacers from the countershaft.
scientia non olet · About LEMON Manuals