LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Shimming Procedures >> Notes

Shimming Procedures: Notes

WARNING: This page is about a different variant/trim than selected.

Special Tools 

J 8001:  Dial Indicator Set

For equivalent regional tools, refer to Special Tools .

NOTE: The shimming procedure is required to be performed during service only when the following parts are replaced:
  • The input shaft
  • The counter shaft
  • The main shaft
  • The adapter plate
  • The main housing
  • The extension housing
scientia non olet · About LEMON Manuals