LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Shift Control Shaft Cover Assembly Assemble

Shift Control Shaft Cover Assembly Assemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Shift Control Shaft Cover Components
    GM1825025Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control shaft cover seal (3).
  2. Install the shift control lever (2) and the shift control lever shaft (4).
  3. Install the shift control lever shaft pin (1).
    4. Fig 2: Shift Control Shaft Components
    GM1825021Courtesy of GENERAL MOTORS CORP.
  4. Install the shift control shaft cover set screw (1).
  5. Install the manual transmission shift lever rod universal joint assembly (3).
  6. Install the manual transmission shift lever pin (2).
  7. Install the manual transmission selector lever rod swivel retainer (4).
scientia non olet · About LEMON Manuals