LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Main Shaft and Input Shaft Disassemble >> Input Shaft

Input Shaft

WARNING: This page is about a different variant/trim than selected.
    NOTE: Do not replace the tapered bearing or the bearing race unless inspection shows that the bearing or the race are damaged.
    Fig 1: Removing Tapered Bearing From Input Shaft
    GM1887570Courtesy of GENERAL MOTORS CORP.
  1. Remove the tapered bearing from the input shaft, using the J 22912-B:  bearing remover and a hydraulic press.
    2. Fig 2: Removing Bearing Race From Input Shaft
    GM2102236Courtesy of GENERAL MOTORS CORP.
  2. Remove the bearing race from the input shaft, using the J 45124:  bridge (1) and the J 39594:  race remover (2).
scientia non olet · About LEMON Manuals