LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Main Shaft and Input Shaft Assemble >> Input Shaft

Input Shaft

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Bearing Race On Input Shaft
    GM1887615Courtesy of GENERAL MOTORS CORP.
  1. Install a new bearing race on the input shaft, using the J 28537-17:  installer and a hydraulic press.
    2. Fig 2: Installing Tapered Bearing On Input Shaft
    GM1887616Courtesy of GENERAL MOTORS CORP.
  2. Install a new tapered bearing on the input shaft. Use the J 44735:  tube and a hydraulic press.
scientia non olet · About LEMON Manuals