Typical Scan Tool Information
WARNING: This page is about a different variant/trim than selected.
CPP Sensor Voltage
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON. CPP Sensor Voltage Parameter Normal Range: 0 V with clutch pedal applied to 5 V when clutch pedal is released. |
|||
| CPP Sensor 5 V Reference | 0 V | 0 V | 5 V |
| CPP Sensor Signal | 0 V | 0 V | 5 V |
| CPP Sensor Low Reference | - | 5 V | - |
CPP Sensor Percentage
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Ignition ON. CPP Sensor Percent Parameter Normal Range: 0% with clutch pedal released to 100% when clutch pedal is applied. |
|||
| CPP Sensor 5 V Reference | 100% | 100% | 0-100% |
| CPP Sensor Signal | 100% | 100% | 100% |
| CPP Sensor Low Reference | - | 0% | - |