Section 17 (Engine Mechanical - 6.2L - Description And Operation)

• Description and Operation
  • Crankcase Ventilation System Description
  • Drive Belt System Description
  • Engine Component Description (6.2L LS3)
    • Notes
    • Camshaft and Drive System
    • Crankshaft
    • Cylinder Heads
    • Engine Block
    • Exhaust Manifolds
    • Intake Manifold
    • Oil Pan
    • Piston and Connecting Rod Assembly
    • Valve Rocker Arm Cover Assemblies
    • Valve Train
  • Engine Component Description (6.2L L99)
    • Notes
    • Camshaft and Drive System
    • Crankshaft
    • Cylinder Heads
    • Engine Block
    • Exhaust Manifolds
    • Intake Manifold
    • Oil Pan
    • Piston and Connecting Rod Assembly
    • Valve Rocker Arm Cover Assemblies
    • Valve Train
  • Cylinder Deactivation (Active Fuel Management) System Description
    • System Operation
    • Valve Lifter Oil Manifold Assembly
    • Active Fuel Management Valve Lifters
    • Engine Block
    • Engine Control Module (ECM)
  • Camshaft Position Actuator and Solenoid Valve Description
    • Camshaft
    • CMP Actuator Solenoid Valve
    • CMP Actuator Magnet
    • CMP Actuator
    • CMP System Operation
    • CMP System Lubrication Flow and Actuator Operation
    • CMP Actuator Park Position Verification
    • CMP Actuator Handling Safety
  • New Product Information (6.2L LS3)
    • Notes
    • Torque Values and/or Fastener Tightening Strategies
    • New Sealants and/or Adhesives
    • Disassembly and Assembly Procedure Revisions
    • Engine Mechanical Diagnostic Procedure Revisions
    • New Special Tools Required
  • New Product Information (6.2L L99)
    • Notes
    • Torque Values and/or Fastener Tightening Strategies
    • New Sealants and/or Adhesives
    • Disassembly and Assembly Procedure Revisions
    • Engine Mechanical Diagnostic Procedure Revisions
    • New Special Tools Required
  • Lubrication Description (6.2L LS3)
  • Lubrication Description (6.2L L99)
  • Lubrication Description - Main Pressure Below 55 psi with Cylinder Deactivation (Active Fuel Management) Off
  • Lubrication Description - Main Pressure Above 55 psi with Cylinder Deactivation (Active Fuel Management) Off
  • Lubrication Description - Main Pressure Below 55 psi with Cylinder Deactivation (Active Fuel Management) On
  • Lubrication Description - Main Pressure Above 55 psi with Cylinder Deactivation (Active Fuel Management) On
  • Cleanliness and Care
  • Separating Parts
  • Replacing Engine Gaskets
    • Special Tools
    • Gasket Use and Applying Sealants
    • Separating Components
    • Cleaning Gasket Surfaces
    • Assembling Components
  • Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
    • Pipe Joint Compound
    • RTV Sealer
    • Anaerobic Sealer
  • Tools and Equipment