LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - 6.2L - Repair Instructions - Off Vehicle (1 Of 3)) >> Throttle Body Assembly Removal

Throttle Body Assembly Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing/Installing Throttle Body
    GM1875999Courtesy of GENERAL MOTORS CORP.
    CAUTION: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
    NOTE: The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.
  1. Remove the throttle body bolts (538).
  2. Remove the throttle body (508).
  3. Remove the throttle body gasket (509).
  4. Discard the gasket.
scientia non olet · About LEMON Manuals