LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - 6.2L - Repair Instructions - Off Vehicle (1 Of 3)) >> Engine Oil Cooler Removal

Engine Oil Cooler Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Engine Oil Cooler Hose/Pipe
    GM2142312Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine oil cooler coolant hose/pipe bolt (1).
  2. Disconnect the hose/pipe (4) from the engine block coolant fitting (2) and oil cooler (3).
  3. Remove the hose/pipe.
    4. Fig 2: Identifying Oil Cooler Components
    GM2054178Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil cooler M8 (1) and M6 (3) bolts.
  5. Remove the oil cooler (4).
  6. Remove the oil cooler gasket (2).
scientia non olet · About LEMON Manuals