LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Mechanical - 6.2L - Repair Instructions - Off Vehicle (1 Of 3)) >> Automatic Transmission Flex Plate Removal

Automatic Transmission Flex Plate Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Flexplate To Crankshaft Retaining Bolts
    GM1950986Courtesy of GENERAL MOTORS CORP.
    NOTE: Note the position and direction of the flex plate (1) before removal. The flex plate (1) does not use a locating pin for alignment. Mark or scribe the end of the crankshaft and the flex plate (1) before component removal.
  1. Remove the flex plate to crankshaft retaining bolts (2).
  2. Remove the flex plate (1).
scientia non olet · About LEMON Manuals