LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2010 >> Camaro LS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Concentric Actuator Cylinder Replacement (Tremec) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Pipe Fitting & Clutch Slave Cylinder Bolts
    GM1347270Courtesy of GENERAL MOTORS CORP.
  1. Remove the manual transmission from the vehicle. Refer to Transmission Replacement .
  2. Disconnect the pipe fitting (1) from the clutch slave cylinder.
  3. Remove the clutch slave cylinder bolts (3).