LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Impala Police >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4T65-E - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Mount Bracket Replacement - Left Side (RPOs LZE/LZ9) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the left engine splash shield. Refer to Engine Splash Shield Replacement (Left) or Engine Splash Shield Replacement (Right) .
  4. Support the transaxle.
    5. Fig 1: Raising Transaxle Assembly
    GM630964Courtesy of GENERAL MOTORS CORP.
  5. Remove the transaxle bracket to transaxle mount upper nuts.
    6. Fig 2: View Of Transaxle Mount Bracket And Bolts
    GM161246Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts which secure the transaxle bracket to the transaxle.
  7. Remove the transaxle bracket.
scientia non olet · About LEMON Manuals