Instrument Cluster Replacement

Fig 1: Replacing Instrument Panel Cluster (IPC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel (I/P) trim plate. Refer to Instrument Panel Trim Plate Replacement .
1	Instrument Panel Cluster Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Procedure Disconnect the electrical connector. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel (I/P) trim plate. Refer to Instrument Panel Trim Plate Replacement .

Instrument Panel Cluster Screw (Qty: 4)

CAUTION: Refer to Fastener Caution .

Tighten: 2 N.m (18 lb in)

Instrument Panel Cluster Assembly

Procedure