Instrument Panel Trim Plate Replacement

Fig 1: Replacing Instrument Panel (I/P) Trim Plate

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel (I/P) outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side and Instrument Panel Outer Trim Cover Replacement - Right Side .
1	Instrument Panel Trim Plate Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Trim Plate Assembly Procedure Disconnect the electrical connector. Tilt the steering column to the lowest position. Remove the driver information center switch. Refer to Driver Information Display Switch Replacement .
3	Retainer Clip (Qty: 8)