LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> HHR SS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.2L Or 2.4L) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Engine Mount To Bracket Bolts
    GM1623160Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the windshield washer solvent reservoir. Refer to Windshield Washer Solvent Container Replacement .
  3. Support the engine with a hydraulic floor jack. Use a piece of wood between the floor jack and the oil pan.
  4. Remove the engine mount to bracket bolts.
    5. Fig 2: Identifying Engine Mount To Side Rail Nuts
    GM1623161Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine mount to side rail nuts.
  6. Remove the engine mount from the engine compartment.
scientia non olet · About LEMON Manuals