LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transmission - TREMEC 6-Speed) >> Repair Instructions - Off Vehicle >> Main Shaft and Input Shaft Assemble >> Input Shaft

Input Shaft

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of New Bearing Race On The Input Shaft, Special Tool J 28537-17 & Hydraulic Press
    GM1887615Courtesy of GENERAL MOTORS CORP.
  1. Install a new bearing race on the input shaft, using the J 28537-17  and a hydraulic press. See Special Tools .
    2. Fig 2: View Of Tapered Bearing, Input Shaft, Special Tool J 25234 & Hydraulic Press
    GM1887616Courtesy of GENERAL MOTORS CORP.
  2. Install a new tapered bearing on the input shaft. Use the J 25234  and a hydraulic press. See Special Tools .
scientia non olet · About LEMON Manuals