LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra5 LT, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transaxle - ZF 4HP 16 - Service, Overhaul, Removal & Installation, Troubleshooting & Diagnosis >> Planetary Gear Set Assemble

Planetary Gear Set Assemble

    Fig 1: View Of Planetary Gear Oil Trays And Front Sun Gears
    GM1256006Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution .
  1. Install the oil trays and the front sun gear to the planetary gear set.
  2. Fig 2: Identifying Front Gear Set Components
    GM1256004Courtesy of GENERAL MOTORS CORP.
  3. Install the front gear set with the rear ring gear, the front sun gear, and the oil trays.
  4. Fig 3: Identifying Axial Needle Bearing
    GM1256003Courtesy of GENERAL MOTORS CORP.
  5. Install the axial needle bearing.
  6. Fig 4: Disassembled View Of Planetary Gear Set
    GM1256002Courtesy of GENERAL MOTORS CORP.
  7. Install the planetary gear set.
  8. Fig 5: Identifying Front Ring Gear Snap Ring
    GM1256001Courtesy of GENERAL MOTORS CORP.
  9. Install the snap ring to the front ring gear.
  10. Fig 6: Identifying Planetary Gear Set Assembly
    GM1256000Courtesy of GENERAL MOTORS CORP.
  11. Install the planetary gear set.
  12. Fig 7: View Of Rear Sun Gear
    GM1255998Courtesy of GENERAL MOTORS CORP.
  13. Install the rear sun gear.
  14. Install the clutch B/E. Refer to Clutch B/E Assemble .