Automatic Transmission Fluid Pan and Gasket Removal: Removal
- Disconnect the negative battery cable.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the engine cover. Refer to Engine Cover Replacement .
- Place a fluid container beneath the fluid drain plug.
- Use DT 46475 (1) to remove the transaxle fluid drain plug. See Special Tools . Drain the transaxle fluid.
- Remove the oil cooler inlet and outlet pipes. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .
- Remove the oil pan, the oil pan bolts, and the oil pan gasket.
CAUTION:
Refer to Battery Disconnect Caution
.