Instrument Cluster Replacement (Impala)

Fig 1: Replacing Instrument Panel Cluster (IPC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the instrument panel trim plate. Refer to Instrument Panel Trim Plate Replacement (Impala) .
1	Instrument Panel Cluster Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten:  2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Refer to Control Module References for programming and setup information. Tip:  Disconnect the electrical connector.