Instrument Panel Trim Plate Replacement (Impala)

Fig 1: Replacing Instrument Panel (I/P) Trim Plate

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the instrument panel outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side and Instrument Panel Outer Trim Cover Replacement - Right Side .
1	Screw, Instrument Panel Trim Plate (Qty: 4) Tighten: 2 N.m (18 lb in)
2	Plate Assembly, Instrument Panel Trim Tip: Disconnect the electrical connector. Tilt the steering column to the lowest position. Remove the driver information center switch. Refer to Driver Information Display Switch Replacement (Impala) .
3	Clip, Retainer (Qty: 8)