Seat Cushion Outer Trim Panel Replacement (Monte Carlo)

Fig 1: Identifying Seat Cushion Outer Trim Panel (Monte Carlo)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Handle, Lumbar Actuator Tip: Pull outward to remove.
2	Handle, Recliner Tip: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle.
3	Knob, Power Seat Switch Tip: Pull outward to remove.
4	Screw, Seat Cushion Outer Trim Panel (Qty: 2) Tighten: 2 N.m (18 lb in)
5	Panel, Seat Cushion Outer Trim Tip: Disconnect the power seat switch electrical connector. Remove the power seat switch from the trim panel. Refer to Seat Switch Replacement - Power (Impala) or Seat Switch Replacement - Power (Monte Carlo) .