Front Fender Replacement

Fig 1: View Of Fender Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front headlamp assembly. Refer to High Intensity Discharge Headlamp Replacement . Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement
1	Fender Bolts (Qty: 10) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Fender Assembly Tip: Transfer any brackets or harness that might be attached to the fender assembly.

Callout

Component Name

Preliminary Procedures

Remove the front headlamp assembly. Refer to High Intensity Discharge Headlamp Replacement .
Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement

Fender Bolts (Qty: 10)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Fender Assembly
Tip: Transfer any brackets or harness that might be attached to the fender assembly.