LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G2500, Van Cargo, 6.6 6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Transfer Case - BW 4473-NP3) >> Repair Instructions - On Vehicle >> Transfer Case Output Shaft Seal Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing J 43484 To J 8092
    GM819655Courtesy of GENERAL MOTORS CORP.
  1. Using the J 43484  (2) and the J 8092  (1), install the transfer case output seal. See Special Tools .
  2. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement .
  3. Check the transfer case fluid level. Refer to Transfer Case Fluid Replacement .
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
scientia non olet · About LEMON Manuals