High Mounted Stop Lamp Replacement (Avalanche)
High Mounted Stop Lamp Replacement (Avalanche)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the center cargo bridge panel. Refer to Panel Replacement - Cargo Box Bridge Center (Avalanche) or Panel Replacement - Cargo Box Bridge Center (Escalade EXT) . |
|
| 1 | High Mounted Stop Lamp Attachment Clips (Qty: 2) |
| 2 | High Mount Stop Lamp Assembly Screw
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 3 | High Mount Stop Lamp Assembly |