LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Silverado 1500 HD, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 8.1L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Valve Rocker Arm and Push Rod Removal

Valve Rocker Arm and Push Rod Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Valve Rocker Arms
    GM470899Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Mark, organize and sort the cylinder head components. Return the components to their original location during reassembly. Make an organizer rack from a piece of wood.
  1. Remove the valve rocker arm nuts, the valve rocker arm balls and the valve rocker arms.
    2. Fig 2: View Of Intake & Exhaust Valve Pushrods
    GM470903Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The exhaust valve push rods (2) are longer than the intake valve push rods (1).
  2. Remove the valve push rods.
    3. Fig 3: View Of Valve Rocker Arm Studs & Pushrod Guides
    GM470906Courtesy of GENERAL MOTORS CORP.
  3. Remove the valve rocker arm studs and push rod guides.
scientia non olet · About LEMON Manuals