Front Floor Console Cupholder Replacement - (Impala)

Fig 1: Replacing Front Floor Console Cupholder

Courtesy of GENERAL MOTORS CORP.

Cupholder Replacement - Front Floor Console (Impala)

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1	Front Floor Console Tip:  Remove the front floor console. Refer to Console Replacement - Front Floor (Impala)  or Console Replacement - Front Floor (Monte Carlo) .
2	Front Floor Console Cup Holder Screw (Qty: 3) Tighten:  2 N.m (18 lb in)
3	Front Floor Console Cup Holder Assembly