Front Floor Console Replacement - (Impala)

Fig 1: Replacing Front Floor Console

Courtesy of GENERAL MOTORS CORP.

Console Replacement - Front Floor (Impala)

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the Front Floor Console Bin Liner. Remove the Console Shift Lever Bezel. Refer to Console Shift Lever Bezel Replacement (Impala)
1	Front Floor Console Bolts (Qty 6) Tighten: 7 N.m (62 lb in)
2	Front Floor Console Assembly Tip: Disconnect the electrical connector.

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the Front Floor Console Bin Liner.
Remove the Console Shift Lever Bezel. Refer to Console Shift Lever Bezel Replacement (Impala)

Front Floor Console Bolts (Qty 6)

Tighten: 7 N.m (62 lb in)

Front Floor Console Assembly
Tip: Disconnect the electrical connector.