Front Bucket Seat Replacement (Monte Carlo)

Fig 1: Replacing Front Bucket Seat

Courtesy of GENERAL MOTORS CORP.

Seat Replacement - Front Bucket (Monte Carlo)

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 and SIR Disabling and Enabling Zone 9 (Monte Carlo) or SIR Disabling and Enabling Zone 9 (Impala) . Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Bolt, Seat Adjuster (Qty: 2) Tip: Adjust the seat forward or rearward to access the bolts. Tighten: 45 N.m (33 lb ft)
2	Seat Assembly Tip: Disconnect the electrical connectors.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Bolt, Seat Adjuster (Qty: 2)
Tip: Adjust the seat forward or rearward to access the bolts.

Tighten: 45 N.m (33 lb ft)

Seat Assembly
Tip: Disconnect the electrical connectors.