Receiver Replacement - Digital Radio

Fig 1: Receiver Replacement - Digital Radio

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Remove the right rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper .
1	Digital Radio Receiver Nut Tighten: 10 N.m (89 lb in)
2	Digital Radio Receiver Assembly Tip: Disconnect the antenna cable. Reprogram the digital radio receiver after installation. Refer to Control Module References .