Trim Panel Replacement - Rear Quarter Upper

Fig 1: Trim Panel Replacement - Rear Quarter Upper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 2 and SIR Disabling and Enabling Zone 6 .
1	Cover, Quarter Upper Trim Panel
2	Screw, Quarter Upper Trim Panel Tighten: 9 N.m (80 lb in)
3	Panel Assembly, Quarter Upper Trim Remove the cargo tie down loop anchor plate and bolt. Tighten: 9 N.m (80 lb in) Pull the trim panel toward the inside of the vehicle to disengage the retainers.
4	Clip, Quarter Upper Trim (Qty: 6)