LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator Tube
    GM1339176Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Unclip the electrical wiring harness from the oil level indicator tube.
  3. Lower the vehicle.
  4. Remove the oil level indicator tube bolt and unclip the upper wiring harness.
  5. Remove the oil level indicator tube.
  6. Remove the oil level indicator tube seal.
scientia non olet · About LEMON Manuals