LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Supporting Engine/Transmission With Hydraulic Floor Jack
    GM851552Courtesy of GENERAL MOTORS CORP.
  1. Support the engine with a hydraulic floor jack. Use a piece of wood between the jack and the oil pan.
    2. Fig 2: Engine Mount To Intermediate Bracket Bolts
    GM1546774Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine mount to intermediate bracket bolts.
  3. Remove the engine mount to midrail nuts (4).
  4. Remove the engine mount from the engine compartment.
scientia non olet · About LEMON Manuals