LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Front Cover Replacement >> Notes

Engine Front Cover Replacement: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the crankcase balancer. Refer to Crankshaft Balancer Replacement .
    2. Fig 1: Identifying Drive Belt Tensioner
    GM1381540Courtesy of GENERAL MOTORS CORP.
  2. Remove the drive belt tensioner.
    3. Fig 2: View Of Idler Pulley
    GM1381542Courtesy of GENERAL MOTORS CORP.
  3. Remove the idler pulley.
    4. Fig 3: View Of Engine Front Cover
    GM412537Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine front cover to water pump bolt.
    5. Fig 4: View Of Engine Front Cover Bolts
    GM412538Courtesy of GENERAL MOTORS CORP.
  5. Remove the remaining engine front cover bolts.
  6. Remove the engine front cover.
  7. If the engine front cover gasket is damaged, remove the front engine mount. Refer to Engine Mount Replacement .
scientia non olet · About LEMON Manuals