LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - MU3.
    2. Fig 1: Identifying Flywheel & Retaining Bolts
    GM412117Courtesy of GENERAL MOTORS CORP.
  2. Remove the flywheel.
    3. Fig 2: Removing Crankshaft Rear Oil Seal
    GM406046Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not damage the outside diameter of the crankshaft or chamber with any tool.
  3. Pry the crankshaft rear oil seal with a flat-bladed tool.
scientia non olet · About LEMON Manuals