LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Supercharger Removal

Supercharger Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of EVAP Tube & Valve
    GM1381507Courtesy of GENERAL MOTORS CORP.
  1. Remove the evaporative emission (EVAP) tube and EVAP valve.
  2. Fig 2: View Of Throttle Body & Gasket
    GM1339289Courtesy of GENERAL MOTORS CORP.
  3. Remove the throttle body bolts.
  4. Remove the throttle body and gasket.
  5. Fig 3: View Of Boost Solenoid, Bracket, & Hose
    GM1381509Courtesy of GENERAL MOTORS CORP.
  6. Remove the boost solenoid bracket nut. Place the boost solenoid, bracket, and hose out of the way.
  7. Fig 4: View Of Fuel Rail Feed Line & Injector Harness Bracket
    GM1381511Courtesy of GENERAL MOTORS CORP.
  8. Remove the fuel rail feed line and injector harness bracket nut.
  9. Remove the fuel rail feed line and injector harness bracket.
  10. Fig 5: View Of Barometric Pressure Sensor & Coolant Return Line Assembly
    GM1381512Courtesy of GENERAL MOTORS CORP.
  11. Remove the barometric pressure sensor and coolant return line bolt.
  12. Remove the barometric pressure sensor and coolant return line.
  13. Fig 6: View Of Fuel Rail & Injector Cups
    GM1381514Courtesy of GENERAL MOTORS CORP.
  14. Remove the fuel rail studs.
  15. Remove the fuel rail and injector cups.
  16. Fig 7: View Of Boost Solenoid, Bracket, & Hose
    GM1381509Courtesy of GENERAL MOTORS CORP.
  17. Remove the boost solenoid bracket nut.
  18. Remove the boost solenoid, bracket, and hoses.
  19. Fig 8: View Of Supercharger & Gasket
    GM1339285Courtesy of GENERAL MOTORS CORP.
  20. Remove the supercharger bolts.
  21. Remove the supercharger.
  22. Remove the supercharger gasket.