LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Oil Level Indicator and Tube Installation

Oil Level Indicator and Tube Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Level Indicator Tube
    GM1339176Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the oil level indicator tube O-ring with engine oil supplement.
  2. Install the tube into the oil pan.
    3. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the indicator tube bracket to the intake manifold bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals