LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Front Oil Seal Installation >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Installing Crankshaft Front Oil Seal
    GM414081Courtesy of GENERAL MOTORS CORP.
  1. Install the seal into the front cover by driving it in from the timing chain side using J 35268-A  . See Special Tools .
  2. Ensure that the engine front cover is properly supported when installing the seal.
scientia non olet · About LEMON Manuals