LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Position Sensor Housing Removal

Camshaft Position Sensor Housing Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Camshaft Position Sensor Housing
    GM1534962Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft position sensor housing studs.
  2. Remove and discard the camshaft position sensor housing seal.
scientia non olet · About LEMON Manuals