LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Camshaft Cover Removal

Camshaft Cover Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Power Steering Blockout Plate
    GM1381518Courtesy of GENERAL MOTORS CORP.
  1. Remove the power steering block out plate studs.
  2. Remove the power steering block out plate.
    3. Fig 2: View Of Camshaft Position Sensor
    GM1381521Courtesy of GENERAL MOTORS CORP.
  3. Remove the camshaft position sensor bolt.
  4. Remove the camshaft position sensor.
    5. Fig 3: View Of Lift Hook
    GM1381527Courtesy of GENERAL MOTORS CORP.
  5. Remove the lift hook bolt.
  6. Remove the lift hook.
    7. Fig 4: View Of Ignition Coil Cover
    GM1339180Courtesy of GENERAL MOTORS CORP.
  7. Remove the ignition coil cover bolts.
  8. Remove the ignition coil cover.
    9. Fig 5: Identifying Ignition Coil
    GM1339268Courtesy of GENERAL MOTORS CORP.
  9. Remove the ignition coil bolts.
  10. Remove the ignition coils.
    11. Fig 6: View Of Coil Harness Bracket & Ground Strap
    GM1381532Courtesy of GENERAL MOTORS CORP.
  11. Remove the coil harness bracket bolt.
  12. Remove the coil harness bracket.
  13. Remove the ground strap bolts.
  14. Remove the ground strap.
    15. Fig 7: View Of Camshaft Cover Assembly
    GM1339181Courtesy of GENERAL MOTORS CORP.
  15. Remove the camshaft cover and bolts.
scientia non olet · About LEMON Manuals