Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Position the air cleaner intake duct.
- Install the air cleaner intake duct bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb ft).
- Install the air cleaner intake duct retainer.
- Install the right front fender liner. Refer to Front Fender Liner Replacement .
- Install the right front tire and wheel. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) .
NOTE:
Refer to Fastener Notice
.