Front Fender Liner Replacement

Fig 1: Replacing Front Fender Liner

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Lift and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels.
1	Screws, Front Wheelhouse Liner (Qty: 7) Tighten: 2 N.m (18 lb in)
2	Retainers, Front Wheelhouse Liner (Qty: 10) Tip: Use a flat-bladed tool to remove the wheelhouse retainers.

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Screws, Front Wheelhouse Liner (Qty: 7)

Tighten: 2 N.m (18 lb in)

Retainers, Front Wheelhouse Liner (Qty: 10)
Tip: Use a flat-bladed tool to remove the wheelhouse retainers.