Master Cylinder Reservoir Replacement
WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
CAUTION:
Refer to Brake Fluid Irritant Caution
.
NOTE:
Refer to Brake Fluid Effects on Paint and Electrical Components Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the brake master cylinder. Refer to Master Cylinder Replacement (Manual Transmission) or Master Cylinder Replacement (Automatic Transmission) . |
|
| 1 | Connector, Brake Fluid Indicator Switch |
| 2 | Switch, Brake Fluid Level Indicator |
| 3 | Pin, Brake Master Cylinder Reservoir (Qty: 2) |
| 4 | Reservoir, Brake Master Cylinder Tip:
|
| 5 | Seal, Brake Master Cylinder Reservoir (Qty: 2) Tip: Apply a small amount of clean Dot 3 brake fluid to the seals. |
| 6 | Cap, Brake Master Cylinder Reservoir |