LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Cobalt LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 642 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Column Jacket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the steering wheel in the straight forward position.
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the column trim covers. Refer to Steering Column Trim Covers Replacement .
  4. Remove the SIR coil module assembly. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
  5. Remove the steering column filler. Refer to Steering Column Opening Filler Replacement .
  6. Remove the ignition lock cylinder case. Refer to Ignition Lock Cylinder Case Replacement .
    7. Fig 1: View Of Steering Column
    GM854962Courtesy of GENERAL MOTORS CORP.
  7. Remove the steering column mounting bolts.
  8. Support the lower column as necessary.
    9. Fig 2: View Of Upper Jacket
    GM854910Courtesy of GENERAL MOTORS CORP.
  9. Remove the jacket attaching bolts and remove the upper jacket from the steering column.
scientia non olet · About LEMON Manuals