Rear Bumper Fascia Bracket Replacement (Sedan)
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Fascia Bracket Replacement (Sedan)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (Coupe) or Rear Bumper Fascia Replacement (Sedan) . |
|
| 1 | Rear Bumper Fascia Side Bracket Bolts (Qty: 5)
NOTE:
Refer to Fastener Notice
.
Tighten: 2.5 N.m (22 lb in) |
| 2 | Rear Bumper Fascia Side Brackets |
| 3 | Rear Bumper Fascia Center Bracket Bolts (Qty: 4) Tighten: 10 N.m (89 lb in) |
| 4 | Rear Bumper Fascia Center Brackets |