Front Bumper Impact Bar Replacement
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Impact Bar Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement . |
|
| 1 | Front Bumper Impact Bar Bolts (Qty: 6)
NOTE:
Refer to Fastener Notice
.
Tighten: 30 N.m (22 lb ft) |
| 2 | Front Bumper Impact Bar |