Front Bumper Fascia Energy Absorber Replacement
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Front Bumper Fascia Energy Absorber Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . |
|
| 1 | Front Energy Absorber Retainers (Qty: 2) |
| 2 | Front Energy Absorber Tip: The absorber is molded into a suitable shape to match the front impact bar and rest on it while the upper fascia grille is installed. |