Seat Back Recliner Handle Replacement - Front

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Back Recliner Handle - Front

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the front seat. Refer to Front Seat Replacement - Bucket . Remove the cushion frame. Refer to Front Seat Cushion Frame Replacement . Remove the seat back cover and pad assembly. Refer to Front Seat Back Cover and Cushion Pad Replacement .
1	Screw, Recliner Handle Tighten: 20 N.m (14 lb ft)
2	Recliner Handle Assembly, Seat Back Tip: Remove the recliner handle return spring.

Callout

Component Name

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove the front seat. Refer to Front Seat Replacement - Bucket .
Remove the cushion frame. Refer to Front Seat Cushion Frame Replacement .
Remove the seat back cover and pad assembly. Refer to Front Seat Back Cover and Cushion Pad Replacement .

Screw, Recliner Handle

Tighten: 20 N.m (14 lb ft)

Recliner Handle Assembly, Seat Back
Tip: Remove the recliner handle return spring.