Seat Back Cover, Pad, and Back Panel Replacement - Rear Split Folding Seat
WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Seat Back Cover, Pad, and Back Panel Replacement - Rear Split Folding Seat
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedures: Remove the rear seat back. Refer to Seat Back Replacement - Rear Split Folding . |
|
| 1 | Screw, Panel Rear Seat Back (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 2 | Panel, Rear Seat Back |
| 3 | Cover Assembly, Rear Seat Cushion |
| 4 | Pad Assembly, Rear Seat Cushion |