Splash Shield Replacement - Engine

Fig 1: Replacing Front Fender Liner

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Lift and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels. Remove the front fender liner. Refer to Front Fender Liner Replacement .
1	Retainers, Engine Splash Shield (Qty: 3) Tip: Use a flat-bladed tool to remove the push-in retainers.
2	Shield, Engine Splash

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Lift and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (5 Lug Wheel) or Tire and Wheel Removal and Installation (4 Lug wheel) in Tires and Wheels.
Remove the front fender liner. Refer to Front Fender Liner Replacement .

Retainers, Engine Splash Shield (Qty: 3)
Tip: Use a flat-bladed tool to remove the push-in retainers.

Shield, Engine Splash